Post #13 Gluing and Stapling Floor Frame

We spent a few days cutting down the 3 sheets of plywood to match the floor framework and positioning it into place.  Then I propped it up and glued and stapled it down. I also added a few 2 1/2 inch screws to a few spots for added strength.  Once that was done we made sure the whole thing was in place on the frame and used T-Nuts and bolts to attach it to the metal frame around the edges, and added a row down the middle.  It should never fall off the frame.

I also did a little wiring to the junction box, The breaks, and breakaway switch, and 7 pin connector are ready to be used.  All I have to do is add the trailer wiring when it's ready to go.